Rent Aerial Work Platforms and Construction Machinery in Meyrin

Meyrin, in the north of the canton of Geneva, is a location with an unusual mix: research facilities, technical industry, logistics space and residential neighbourhoods sit close together, alongside the immediate vicinity of the airport. Anyone looking to rent aerial work platforms and construction machinery here therefore rarely plans by working height alone. Site access, zone allocation and the operator's approval come first and determine which machine is allowed onto the site at all. Luibl rents aerial work platforms, telehandlers, excavators and forklifts to plant engineering firms, pipeline and ventilation contractors, electrical installers and maintenance teams in Meyrin and across the wider Geneva region — with inspection certificates and technical documentation that you need for registration with the site operator.

On technically operated sites, it is not the tenant who decides which machine may work where. The operator defines the zones, issues access and work permits, and specifies which drive type, dimensions and additional equipment are permitted. These requirements need to be clarified before ordering equipment, not afterwards. For every model we supply the data required in the approval process: machine weight, outrigger forces, dimensions in travel and working position, drive type and the current inspection certificate. We make no claim of suitability for potentially explosive atmospheres; zone classification and the assessment of what may be operated within a zone remain the operator's responsibility.

For work on pipework, service routes, cable trays and ventilation systems inside halls, electric scissor lifts with 6.30 to 33.00 m working height are the workhorse: locally emission-free, with a large platform area for tools and installation material, and platform loads of up to 1,000 kg. Where routes have to be reached over machinery, platforms or stored goods, electric articulated boom lifts with 10.89 to 28.00 m guide the basket around the obstacle. Outdoors and in halls with greater clearance heights, articulated boom lifts reach up to 48.15 m.

For narrow aisles between racking, switchgear and service shafts, mast platforms with 10.00 to 12.65 m are the only type of machine that can still be set up and moved there. Halls with tall racking systems are served by high-rack scissor lifts with 18.50 to 33.00 m working height.

One point that applies to all French-speaking locations across the Geneva and western Swiss region: coordination with the operator, safety briefings and on-site communication are generally conducted in the local language. Before deployment, clarify in which language operators will be briefed and who will deliver that briefing — the briefing itself is the tenant's responsibility, not the rental company's.

The second factor that sets Meyrin apart from other industrial locations is its proximity to the airport. Obstacle limitation surfaces apply in the adjoining areas, and any machine that extends a long way can intrude into these surfaces. This affects not only cranes but also tall aerial work platforms and telehandlers with a fully raised boom.

The rule for planning is simple: the closer to the airport and the taller the machine, the earlier the question of a permit needs to be raised. Before scheduling equipment, check whether your work site lies within a restricted area and what maximum height is permitted there. The task can often be solved with a lower machine — for example a scissor lift instead of a fully extended telescopic boom lift — where the work takes place close to the facade anyway. Where height is genuinely needed, we provide the maximum erected height of the model so that you can state it in the application. The application procedure itself is handled by the client or the contracting company; we supply the technical specifications.

Class	Working height	Platform load
Electric scissor lifts	6.30 – 33.00 m	227 – 1,000 kg
Diesel scissor lifts	9.70 – 34.00 m	363 – 1,134 kg
High-rack scissor lifts	18.50 – 33.00 m	450 – 1,000 kg
Articulated boom lifts	10.89 – 48.15 m	150 – 450 kg
Telescopic boom lifts	14.00 – 56.90 m	227 – 454 kg
Mast platforms	10.00 – 12.65 m	200 kg
Tracked aerial platforms	13.00 – 39.50 m	200 – 400 kg

Plant work rarely depends on the platform alone. Components have to be moved to the installation point, spare parts brought from storage, and excavation carried out for foundations and pipework. Fixed-frame telehandlers cover 4.30 to 18.80 m lifting height with 1.25 to 25 t capacity and place loads over fences, pipe bridges and existing structures. The rotating (roto) version with 15.42 to 38.90 m and 4 to 8 t rotates from a single set-up position and has the advantage where manoeuvring space on site is limited. For work inside enclosed halls, electric telehandlers with 5.85 to 30.00 m and 2.5 to 7 t are available.

For earthworks and pipeline construction, excavators from 1.8 to 30 t operating weight are available. For handling on paved surfaces and inside halls, forklifts from 3 to 16 t and high-lift stackers with 2.70 to 5.50 m lifting height and 1.2 to 2.0 t capacity complete the range.

In Switzerland, operator obligations are governed by the Ordinance on the Prevention of Accidents and Occupational Diseases (VUV); supervision is carried out by SUVA, supplemented by the EKAS guidelines. The framework follows from the Labour Act and its associated ordinances, while the recurring inspection of mobile elevating work platforms follows from SN EN 280.

In practice, this means a clear division of responsibilities. We provide the inspected machine, the inspection certificate, the CE documentation and the operating manual — exactly the documents required in the approval process on technical sites. The tenant provides the risk assessment for the specific job, the briefing of operators and the rescue plan for the basket. The visual and functional check before every start of work is also one of the on-site operator's duties. Where the site operator imposes additional requirements, these take precedence over the general rules.

We organise transport from Passau with our own fleet of vehicles. The approach to Meyrin via the Geneva motorway connections is straightforward; things get demanding at the site gate. On registered sites, transport requires an access permit, a time slot and often an escort from the gate onwards. Let us know early which documents are required for entry, where unloading is permitted and which route the machine will then take under its own power. Clearance heights of pipe bridges, canopies and hall gates are the most common stumbling block on technical sites. For projects spread across the agglomeration, we coordinate deployment with our locations in Geneva through a single point of contact.

Rent aerial work platforms → | Submit an enquiry →

What documentation does a site operator in Meyrin require for the machine?

Typically machine weight, dimensions in travel and working position, outrigger forces, drive type and the current inspection certificate, sometimes together with the CE documentation. We provide this information for the intended model so that you can prepare the registration and work permit. Which documents are required in a specific case is determined by the operator — ask them before placing the order.

Are the machines suitable for potentially explosive atmospheres?

We make no commitment on this. Zone classification, the determination of which equipment is permitted within a zone, and approval for the work are matters for the plant operator. Tell us what requirements follow from the approval; we will then tell you which machines in the rental fleet meet the required technical specifications and which are not suitable.

Is there a height restriction for aerial work platforms because of the airport?

Obstacle limitation surfaces apply in the adjoining areas, and these can also affect fully extended aerial work platforms and telehandlers. Before scheduling equipment, clarify whether your work site is affected and what height is permitted there; the permit is applied for by the client or the contracting company. We provide the maximum erected height of the intended model for the application and, if needed, suggest a lower alternative.

Which platform is right for installation work on cable trays and ventilation systems inside a hall?

For work directly above the route, electric scissor lifts are the first choice: a large platform area, platform loads of up to 1,000 kg and working heights from 6.30 to 33.00 m. If you need to reach the route over machinery or stored goods, an electric articulated boom lift with 10.89 to 28.00 m guides the basket around the obstacle. The decisive factors are hall clearance height, floor load-bearing capacity and the free space beneath the work location.

What language is used for briefings on site?

In the Geneva area, French is the working language on most sites, including for safety briefings and access training. Before deployment, clarify with the operator which language will be used for the briefing and whether your operators will be able to take part. Briefing operators is the tenant's responsibility; we supply the operating manual and technical documentation for the machine.

Which design suits your job? The overview Rent a lifting platform – all platform types at a glance explains scissor lifts, articulating and telescopic boom lifts, mast, spider and truck-mounted lifts and shows what the rental price depends on.