Rent High-Rack Scissor Lifts – Narrow Aisle up to 33 m Working Height

High-rack warehouses have a physics all their own: aisles under one metre wide, floors with defined point-load limits, racking that reaches double-digit metre heights, and fire suppression systems that turn every metre of platform area into a challenge. Standard scissor lifts are not built for this environment. High-rack scissor lifts are.

Luibl rents narrow-aisle scissor lifts from Holland Lift, Magni, PB Lifttechnik and HAB with working heights from 18.5 m to 33 m and machine widths from 0.76 m – exclusively with electric drive and non-marking tyres.

An indoor electric scissor lift typically has a platform width of 0.80 m to 1.20 m and reaches a maximum of 12 m. That's enough for hall assembly or building maintenance work – but not for the demands of an automated high-rack warehouse.

High-rack scissor lifts solve four specific problems at once:

Extreme narrowness combined with great height. The Holland Lift HL330 E14 4WDS reaches 33 m working height at a machine width of 1.40 m. Machines in the HL285 class travel through aisles from 1.50 m at 28.2 m working height. Small models such as the Holland Lift N-165EL (18.5 m) manage a width of just 0.76 m.

Driving under load at full height. In high-rack warehouses, mobility at full extension is not a convenience – it's an operating mode. Maintenance teams travel along entire racking rows without lowering the platform in between. This capability significantly reduces the time spent working across the floor area.

Load capacity for heavy tools and materials. Models such as the Magni ES3225RT or the HAB S225-24 E4WDS carry 750 kg to 1,000 kg on the platform. Anyone replacing sprinkler heads, swapping conveyor components, or carrying heavy tools needs this reserve capacity.

Emission-free operation on sensitive floors. High-rack warehouses often have coated or sealed industrial floors. Non-marking tyres leave no scuff marks. Electric drive means no exhaust, no odour nuisance, no elevated CO₂ levels in enclosed halls.

Luibl maintains one of the largest rental fleets of high-rack scissor lifts in the DACH region. The available models cover every relevant height and width class.

Holland Lift – the benchmark for narrow-aisle stability

Among logistics planners, Holland Lift is the reference brand when it comes to great heights and maximum stability. These Dutch-built machines are engineered for continuous use in high-rack warehouses – with a chassis that operates precisely even on uneven industrial floors.

The HL330 E14 4WDS is the flagship model: 33 m working height, 6.40 m × 1.40 m platform, 600 kg load capacity, electric drive. It fits through aisles from 1.60 m wide, making it the choice for high-rack warehouses with standardised narrow-aisle systems.

The HL285 E13 4WDS covers the 28 m class: 28.2 m working height, 5.41 m platform depth, 750 kg load capacity at 1.30 m machine width. For sites that don't need 33 m but demand the highest precision on difficult floors.

The N-165EL serves the lower class: 18.5 m working height at just 0.76 m width, 500 kg load capacity. The model of choice for narrow-aisle warehouses in the 18 m class and for assembly work in existing warehouse structures that are too tight for standard machines.

Magni ES series – performance for medium to great heights

Magni's ES series brings machines with generously sized platforms and modern control technology.

The ES3225RT reaches 32 m working height with a platform size of 8.30 m × 6.20 m and 1,000 kg load capacity – the highest load capacity in Luibl's entire high-rack rental fleet. Ideal for logistics halls with heavy conveyor equipment.

The ES2223RTP (22 m working height, 7.65 m platform length, 750 kg) and the ES2212 (22 m, 6.10 m platform, 600 kg) cover the mid-height class.

PB Lifttechnik – reliable all-rounders in the 22 m and 32 m classes

PB machines manufactured in the Netherlands offer a consistently high safety standard in compact dimensions. The PB S320-14ES 4×4 (32 m working height, 7.65 m platform, 750 kg, 1.20 m machine width) is one of the most sought-after machines in the portfolio. In the 22.5 m class, the PB 225-12E (450 kg) and PB 225-12ES (450–600 kg) models are available.

HAB – a wide selection across every height class

HAB rounds out the portfolio with machines in three height classes. The HAB S320-12E 4WDS (32.4 m, 600 kg) and the HAB S280-12E 4WDS (28 m, 600 kg) cover the upper range. In the 22.5 m class, models with 600 kg are available – and, in the heavy-duty version HAB S225-24, with 750 kg load capacity.

Intralogistics and warehouse planning. Maintenance of conveyor systems, sprinkler systems and lighting above active storage areas. What matters here is that the machine doesn't block the warehouse layout and can navigate between the racks.

E-commerce logistics. High-throughput distribution centres with automated storage and retrieval technology require regular maintenance intervals at great height. The combination of narrowness and load capacity is indispensable in this segment.

Cold stores and deep-freeze warehouses. Special hydraulic oils and low-temperature batteries enable operation below zero degrees. Luibl advises on which models suit which temperature classes.

Industrial halls – lighting, ventilation, fire protection. Tall production halls with tight column spacing need slim machines. Installing or maintaining lighting systems, sprinkler heads or ventilation ducts at 25 m and above is barely efficient without high-rack scissor lifts.

Stocktaking. Narrow-aisle scissor lifts can be moved along entire racking runs without lowering the platform. This makes systematic stock checks of the topmost storage levels considerably faster.

High-rack scissor lifts from 28 m working height upward bring dead weights of 8 t to almost 24 t. In high-rack warehouses, industrial floors are designed for specific area loads, not concentrated point loads.

The following points should be clarified before renting:

• Permissible point load of the hall floor (kN/m² or t/m²) – manufacturer certification or structural calculations are usually held by the building owner

• Aisle width in the usable area – the clear dimension between rack uprights, not the module width

• Ceiling height and clearance for the platform in the fully extended position

• Floor surface – epoxy resin, sealed concrete, concrete slabs – relevant for choosing the right tyres

Luibl advises on machine selection based on these parameters. For complex sites, a technician can assess the operating conditions on request beforehand.

Luibl is not the only scissor lift rental provider in Germany and Austria. But in the segment of high-rack specialist equipment from 22 m upward, a portfolio of this depth from a single provider is comparatively rare.

Rental fleet. Holland Lift, Magni, PB Lifttechnik and HAB across every relevant height class – generally young machines with a documented maintenance history.

Logistics. High-rack scissor lifts from 28 m upward are among the heaviest and bulkiest equipment in the rental fleet. Luibl transports with its own fleet of low-loaders – across Europe. That means no dependency on subcontractors for time-critical project deliveries.

Advice. Technical preparation – floor loading, aisle width, load-capacity requirements – is more involved for high-rack equipment than for standard machines. Luibl clarifies these points in advance so the machine fits the job from the first deployment.

Training. Anyone operating a high-rack scissor lift for the first time needs an induction. Luibl offers training for all equipment types – including specifically for high-rack scissor lifts.

For projects involving high-rack scissor lifts, we recommend a direct enquiry with the following details: working height, aisle width, load-capacity requirement, rental period and site location. The more precise the details, the faster Luibl can put together a suitable quote.

Get in touch: https://www.luibl.ch/en/contact/