Rent Aerial Work Platforms and Construction Machinery in Vernier

Vernier is the second-largest municipality in the canton of Geneva and brings together two very different worlds in a confined space: to the west and north, the industrial and tank-farm zone with energy and utility infrastructure; to the south and east, the dense residential districts of the Geneva agglomeration. Anyone renting aerial work platforms and construction machinery here faces entirely different constraints depending on the site — on one plot, the operator's approval decides which equipment can be used; in a residential district, it's the space between two rows of buildings. Luibl rents out aerial work platforms, telehandlers, excavators and forklifts to industrial service providers, pipeline contractors, electrical and building-services firms, and construction companies in Vernier and throughout the canton of Geneva.

On tank farms and in utility infrastructure, equipment planning does not begin with the working height but with the approval. The operator divides the site into zones, determines which work is permitted there, which equipment may be used, and who is granted access. We explicitly do not claim that our machines are suitable for explosion-hazard areas — that assessment is the operator's responsibility, and it belongs before the order, not after.

What we can contribute is reliable technical data. For every model under consideration, we provide machine weight, dimensions in travel and working configuration, outrigger loads, drive type, and the current inspection certificate. This data supports a solid case in the approval process, and lets you find out early whether a machine is ruled out.

The work itself is typical of ongoing asset maintenance: inspection and repair of tank shells and roofs, corrosion protection, work on pipe bridges, fittings, shut-off valves, measurement and control technology, plus painting and labelling. On paved areas between tanks and pipe routes, articulated boom lifts with 10.89 to 48.15 m are in demand, because they reach over a pipe bridge to the fitting behind it without the machine having to drive there. On unpaved ground, in containment basins and on embankments, tracked lifts with 13.00 to 39.50 m working height bring their tracked undercarriage into play as an advantage: the load is spread out, and the set-up point does not need to be paved first. For work on tall tank walls from a distance, telescopic boom lifts up to 56.90 m are available.

Two things you should clarify with the operator before transport is arranged: the time window in which work is permitted, and who provides supervision during the work. Both affect how long a machine is tied up, and therefore your scheduling.

The second strand in Vernier is residential construction. The districts are densely built, the buildings stand in rows, and between them lie access paths, green spaces and visitor parking instead of site facilities. Facade renovations, balcony repairs, window replacements, roof-edge work and the retrofitting of building services all take place while the buildings remain occupied.

For these jobs, compact dimensions and an outrigger footprint that fits the available space are what count. Electric scissor lifts from 6.30 to 33.00 m cover stairwells, entrance halls, underground car parks and lower facade sections; they run quietly and with zero local emissions, which matters when working next to residential windows. Where a porch, a tree or a boundary fence is in the way, electric articulated boom lifts with 10.89 to 28.00 m guide the platform around it. For isolated jobs in inner courtyards and on narrow paths, mast lifts with 10.00 to 12.65 m are the most compact solution.

Green spaces, soakaway areas and paths built over underground structures cannot tolerate point loads. Load-spreading mats therefore belong in every plan, and wherever a machine drives over or sets up on top of an underground car park slab, approval from the as-built structural documents is required. We provide you with the weight and outrigger loads of the model so your site management can make the call.

Class	Working Height	Platform Capacity
Electric Scissor Lifts	6.30 – 33.00 m	227 – 1,000 kg
Diesel Scissor Lifts	9.70 – 34.00 m	363 – 1,134 kg
High-Rack Scissor Lifts	18.50 – 33.00 m	450 – 1,000 kg
Articulated Boom Lifts	10.89 – 48.15 m	150 – 450 kg
Telescopic Boom Lifts	14.00 – 56.90 m	227 – 454 kg
Mast Lifts	10.00 – 12.65 m	200 kg
Tracked Lifts	13.00 – 39.50 m	200 – 400 kg

Maintaining technical plant requires lifting capability at ground level as much as at height. Telehandlers in fixed-frame design cover 4.30 to 18.80 m lift height at 1.25 to 25 t capacity and place fittings, pipe sections, pumps and scaffolding material where a forklift cannot reach. When the set-up position is fixed and cannot be changed, the rotating (roto) version with 15.42 to 38.90 m and 4 to 8 t plays out its advantage: the boom rotates from a single set-up position into the target area.

In pipeline and civil engineering work, our fleet of excavators covers 1.8 to 30 t operating weight, from small units for house connections in residential areas to machines for utility lines and foundations. For handling on paved surfaces, forklifts from 3 to 16 t are available, and for unpaved site areas, rough-terrain forklifts.

Work carried out in Vernier is governed by Swiss law. The relevant regulation is the Ordinance on the Prevention of Accidents and Occupational Diseases (VUV), within the framework of the Labour Act and its associated ordinances. SUVA is responsible for enforcement and supervision, and the EKAS guidelines set out the requirements in detail. Mobile elevating work platforms undergo recurring inspection in accordance with SN EN 280.

The division of responsibilities is clear. Luibl provides the inspected machine complete with inspection certificate, CE documentation and operating instructions. The renter carries out the risk assessment for the specific job, instructs the operators, specifies the personal protective equipment, and maintains a rescue plan for the platform. The visual and functional check before work begins is the operator's duty. On fenced sites, the operator's own requirements also apply; these are stricter and take precedence over the general rules.

We organise transport from Passau with our own fleet of vehicles. The industrial zone of Vernier is well served by Geneva's motorway access points, while the residential districts are reached via narrow access roads with turning areas that are tight for a low-loader. Before scheduling, clarify where the machine can be unloaded and which route it will then travel under its own power. On sites with gate control, an access permit, driver registration and a time window are standard requirements — let us know these requirements early, and we will coordinate delivery accordingly. For projects spanning multiple locations, we coordinate deployments in Vernier with those in Geneva and Lausanne through a single point of contact.

Rent aerial work platforms → | Make an enquiry →

Are your aerial work platforms approved for use on a tank farm?

Approval for a specific area is granted exclusively by the operator of the facility. We therefore neither confirm that a machine may be used in a particular zone, nor do we claim suitability for explosion-hazard areas. What we provide are the technical specifications of the machine and the current inspection certificate, so that you can submit a complete approval application.

Which machine can reach a fitting behind a pipe bridge?

That is exactly what the articulated boom lift is built for: it reaches 10.89 to 48.15 m working height and guides the platform over or around an obstacle, so the machine can remain on the paved area in front of it. The decisive factors are the height of the pipe bridge, the horizontal distance to the work location, and the available set-up area. Send us these three measurements and we will narrow down the suitable models.

How do you set up in a containment basin or on unpaved ground?

Tracked lifts with 13.00 to 39.50 m working height have the advantage here, because the tracked undercarriage spreads the load over a larger area and lets the machine reach the set-up point even across soft or uneven ground. Whether a containment basin may be driven into at all, and what protective measures are required, is determined by the operator. We factor in outrigger pads and base material as part of the planning.

Is it permitted to set up on top of an underground car park slab in a residential area?

Only with approval. This requires the permissible area and point loads from the as-built structural documents, and generally load-spreading mats under the outriggers. We provide you with the machine weight and outrigger loads of the intended model; assessing the structure itself is the responsibility of your site management or a structural engineer. Without this approval, we plan for a set-up area outside the underground structure instead.

Which platform is suitable for balcony renovations in an occupied building?

For work next to occupied apartments, electric scissor lifts and electric articulated boom lifts are a good fit: quiet, with zero local emissions, and a comparatively narrow footprint. The decisive factor for the required height is whether you approach the balcony from the front or need to work over a projecting overhang. Also plan for barriers beneath the work area and unobstructed access to building entrances.

Before you enquire, it is worth looking at the designs: at Rent a lifting platform you will find all platform types from the scissor lift to the truck-mounted platform with their strengths, typical applications and operator duties.