Rent Manitou: Powerful Telehandlers and Forklifts for Your Project

Anyone moving loads to height and across obstacles on the construction site quickly reaches the limits of a standard forklift. As soon as lift height, side reach, and off-road capability are all required at once, there's no way around a telehandler. When you rent a Manitou, you get exactly this combination in a single machine: high load capacity, wide reach, and a chassis that also works on unpaved ground. At Luibl in Pocking, you get the right machine for your specific load capacity, access height, and ground conditions – available at short notice and with our own delivery logistics.

This overview shows you which Manitou series suits which application, what to watch out for in the load chart and reach, and how renting from Luibl works.

Manitou divides its telehandlers into two basic designs that differ clearly in their technology. Knowing the difference helps you choose the right machine faster and avoid costly rental mistakes.

Manitou MT (fixed): On the MT series, the telescopic boom extends straight forward. The upper carriage does not rotate. This design is the first choice for classic material handling: picking up pallets, stacking building materials, supplying scaffolding and upper floors, loading and unloading trucks. For a given size, fixed telehandlers usually offer higher payload and work quickly through repeating transport cycles. As rough-terrain forklifts, they easily replace a front forklift on uneven ground.

Manitou MRT (rotating): The MRT series features an upper carriage that rotates a full 360 degrees continuously. The rotating telehandler can pick up loads and set them down elsewhere without having to reposition the machine itself. This is the decisive advantage on confined construction sites, at fixed working positions, or whenever work needs to happen all around the machine – for example with a work platform basket for installations at height. Combined with outriggers, an MRT telehandler achieves great lift heights and reach with controlled stability.

Two criteria almost always determine the choice: the required lift height and the side reach at the site. A fixed telehandler scores with speed, payload, and lower rental costs. A rotating telehandler scores with precision and flexibility when the machine stays in one position and the working radius must be covered all around.

As a rough guide: for pure material transport on open ground, an MT is usually sufficient. As soon as you're working from a fixed position and serving several drop-off points or height levels, the MRT plays to its strengths.

Not sure which load capacity to choose? Our experts in Pocking will help you calculate your requirements.

The most important technical figure for any telehandler is not a single maximum value, but the load chart. It shows how much load can be safely lifted at a given reach and lift angle. The relationship is clear: the stated maximum load capacity only applies at minimum reach, i.e. with the boom retracted close to the vehicle. The further the boom extends and the flatter the lift angle, the more the permissible load decreases. Anyone who only looks at the rated capacity and ignores the reach risks an overload – and in the worst case, tipping the machine.

For planning, this means: you need to know the actual load at the furthest position required, not just the absolute weight. This is exactly where prior consultation with the rental company pays off.

The hydrostatic drive on many Manitou telehandlers provides sensitive maneuvering, continuously variable power transmission, and high tractive force at low speed. Combined with all-wheel drive, all-wheel steering, and coarse-tread off-road tires, the telehandler becomes a fully capable heavy-duty forklift for unpaved ground, mud, or gravel.

When is a Manitou telehandler preferable to a standard forklift? Whenever at least one of these conditions applies:

• Height: You need to lift loads several meters – higher than a front forklift can reach.
• Ground conditions: The ground is uneven, soft, or unpaved.
• Reach: You need to set a load down across an obstacle (e.g. over a pit, scaffolding, or onto an upper floor).
• Flexibility: Changing tasks require different attachments (fork tines, work platform basket, winch, bucket).

This means a Manitou covers application areas that would otherwise require several machines – from aerial-lift-like height access with a work platform basket to heavy material handling. For pure work-at-height tasks, also check our aerial work platform rentals; for pure earthmoving and material handling, our wheel loader rentals are also available.

Before requesting a telehandler, clarify these three points – it saves time, cost, and prevents rental mistakes:

1. Check the ground: Is the ground load-bearing, level, or sloped? This determines the tires, axle load, and whether outriggers are needed.
2. Calculate the load capacity: Determine the actual load weight and the position (height + reach) at which it is set down. Only this combination determines the right model according to the load chart.
3. Measure access heights and widths: Gates, passageways, ceiling heights, and turning circles limit the machine size that can be used. Measure critical narrow points in advance.

The difference between a smoothly running and a stalled construction site often comes down to machine logistics. Luibl operates its own rental fleet and its own transport fleet. This brings three concrete advantages:

• Short downtimes: Because delivery and collection are coordinated in-house, you don't wait on external freight carriers. The machine is there when it's needed.
• Direct availability of current Manitou generations: You rent modern equipment instead of outdated machines – with corresponding operational safety and efficiency.
• Reliable delivery from Passau: The location in Lower Bavaria reliably covers the region and surrounding area.

Instead of booking an off-the-shelf machine, clarify load capacity, reach, and attachments with the Luibl team in advance – so exactly the right machine arrives on your construction site.

Request your project's machine requirements individually now.

Telehandlers are powered industrial trucks with high kinetic energy. Their operation is subject to clear rules in Switzerland. The relevant VUV (Ordinance on the Prevention of Accidents), together with SUVA's guidelines, governs the safe operation of power-driven industrial trucks and forms the basis for the requirement that operators be trained, instructed, and appointed in writing. ISO 3691-1 internationally defines the safety requirements for self-propelled industrial trucks and their verification. Anyone who takes these standards seriously protects personnel and machine – and avoids liability risks.

In practice, this means: only instructed, qualified personnel operate the telehandler. Luibl provides briefings for operating personnel so your staff can safely operate the rented machine.

Check availability and rental terms – or go straight to requesting your project's machine requirements individually. The team in Pocking will advise you on the right Manitou series, load capacity for your reach, and site logistics.