Manitou MI 70 D ST5
Technical data
- Load capacity: 7,000 kg
- Max. lift height: 6,000 mm
- Mast type: triplex with free lift
- Engine: Deutz diesel, 55 kW
- Transmission: ZF transmission
- Brakes: oil-immersed multi-disc brakes
- Tyres: pneumatic tyres 8.25-15 14PR
- Dead weight: 10,110 kg
- Overall width: approx. 1,990 mm
- Aisle width for 800×1200 pallet lengthwise: 5,350 mm
- Drive: diesel
- Standard equipment: side shift, load backrest, ergonomic operator station, power steering
Hire the Manitou MI 70 D
Seven tonnes of load capacity, a triplex mast with 6,000 mm lift height, a Deutz diesel engine with ZF transmission – the Manitou MI 70 D is the industrial counterbalance forklift for applications where 5-tonne forklifts are no longer sufficient. Steel coils, heavy machine components, paper rolls, precast concrete elements: loads in this class need a machine that was built for them.
Area of application
The MI 70 D is designed for paved surfaces outdoors and in adequately ventilated halls – industrial halls, production sites, storage areas on asphalt or concrete. The pneumatic tyres absorb minor unevenness in the ground and, at this weight, offer better stability than solid rubber tyres.
Typical applications:
- Heavy-load handling in the steel, paper and timber industries
- Loading and unloading of heavy goods vehicles on paved outdoor areas
- Handling of machine components and heavy plant elements
- Warehouse logistics in production facilities with loads over 5 tonnes
The free lift allows lifting work before the mast itself starts to extend – relevant wherever ceiling height or crane rails are in the way.
Engine and transmission
The 55 kW Deutz diesel engine is designed for continuous operation under load. Deutz power units are regarded as particularly robust and low-maintenance in heavy-load logistics – a factor that has a direct effect on operating costs in intensive shift operation.
The ZF transmission sets the MI 70 D apart from smaller MI models. ZF stands for precise power transmission even with heavy loads and abrupt load changes. Combined with the oil-immersed multi-disc brakes, which wear considerably more slowly than conventional drum brakes, the result is a drivetrain designed for intensive industrial use, not for occasional use.
Tyres and ground loading
The MI 70 D runs on 8.25-15 14PR pneumatic tyres. This is the standard configuration in this weight class: pneumatic tyres absorb shocks better than solid rubber tyres and relieve the transmission and chassis on uneven surfaces. For indoor use on sensitive floor coverings such as epoxy resin or paint coatings, it should be checked in advance whether the surface load and tyre/floor compatibility are given.
Standard equipment
- Side shift: precise load positioning without repositioning at the rack location
- Load backrest: operator protection with protruding or unsecured loads
- Power steering: agile despite around 10 tonnes of dead weight
- Ergonomic operator station: suspended seat, adjustable workplace, clearly arranged instruments
- Easy maintenance access: basic maintenance points quickly accessible, minimising downtime
Hire from Luibl Rental
The Manitou MI 70 D is available for hire from Luibl Rental; we organise delivery and transport by arrangement. For longer project requirements, long-term rental conditions including maintenance intervals can be agreed.
For different fork lengths or additional attachments, please enquire directly.
Request a quote now.
FAQ on the Manitou MI 70 D
What distinguishes the Manitou MI 70 D from smaller MI models such as the MI 35 or MI 50?
The weight class and the drivetrain. The MI 70 D lifts 7,000 kg – twice as much as the MI 35. It also has a ZF transmission instead of a torque converter and pneumatic tyres instead of superelastic solid rubber tyres. This makes it the right choice for genuine heavy-load applications in industry, where the smaller models reach their design limits.What does free lift mean on this model?
Free lift indicates how far the fork carriage can be raised before the mast itself extends upwards. This allows lifting work under low ceilings without immediately increasing the overall height of the machine.Is the MI 70 D suitable for indoor use?
Yes, for adequately ventilated halls with a load-bearing, paved floor. The pneumatic tyres are generally suitable for indoor operation; with sensitive floor coverings, for example epoxy resin, check the surface pressure and floor load capacity in advance.Check availability now and request a quote.
