Rent Diesel Scissor Lifts from Luibl Rental

Anyone who needs to lift heavy loads on unpaved outdoor terrain cannot avoid a diesel scissor lift. Electric units are ruled out on topsoil, gravel or sloped open ground – not because of working height, but because of drive system, ground clearance and load reserves under real-world conditions. The Luibl rental fleet comprises 27 diesel scissor lifts from renowned manufacturers such as Holland Lift, JLG, Magni, Genie and HAB – with working heights from 10 m to 34 m and load capacities of up to 1,000 kg. All machines are inspected before handover in accordance with the applicable inspection cycles under VUV / SUVA guidelines (incl. EKAS) and SN EN 280, and are delivered in technically flawless condition.

Not every diesel scissor lift is suited to every application. The decisive selection parameters are working height, platform payload, extended platform length and the terrain capability of the chassis. Luibl divides its diesel portfolio into three performance classes, so you can already gauge which machine category your project requires before making an enquiry.

Compact class: 10 m to 14 m working height for confined outdoor areas

Compact diesel scissors are the right choice when access routes are narrow, the ground is uneven, and double-digit working heights are still required. Models in this class have a narrow overall width that allows passage through standard site gates, and a sliding deck extension that increases usable platform area without a lifting operation. Typical applications include facade work on existing buildings with limited forecourt space, installation work on plant sites with an uneven gravel bed, or assembly work on construction sites where no crane is available.

Equipment class at a glance:

• Working height: 10 m to 14 m
• Drive: diesel/four-wheel drive
• Gradeability: up to 45%
• Platform design: sliding deck extension for elevated material storage

Large scissor lifts with extended deck: 15 m to 22 m

From around 15 m working height upward, the focus shifts to platform capacity. In hall construction and facade work, these machines are used when several people need to work on the platform at the same time and materials such as sandwich panels, ventilation ducts or beam profiles are to be handled directly from the deck. Platforms in this class extend to lengths of over 6 m, with a load capacity of up to 750 kg – enough for two people with heavy tools and prefabricated material.

A proven machine in this segment is the JLG Liftlux 203-24: 22.5 m working height, 750 kg load capacity, 10 m² platform area, 11,400 kg unladen weight. The same applies to the HAB S225-24 D4WDS with 22.5 m working height and four-wheel drive. Both models are available with white, non-marking solid rubber tyres – a key criterion for use in freshly coated production halls, where conventional off-road tyres would leave tracks.

The JLG Liftlux 260-25 covers the upper end of this class with a working height of 28 m. Four-wheel steering combined with four-wheel drive ensures precise propulsion even on uneven terrain; proportional control of all drive and lift functions enables millimetre-precise positioning under load. In the stowed position the machine moves at 3.6 km/h, while travel speed in the raised position is limited to 0.3 km/h.

Equipment class at a glance:

• Working height: 15 m to 28 m
• Load capacity: up to 750 kg
• Platform design: large sliding deck extension, non-marking solid rubber tyres available
• Typical models: HAB S225-24 D4WDS, JLG Liftlux 203-24, JLG Liftlux 260-25, HAB S280-25D 4WDS

High-reach and large scissors: 23 m to 34 m for industrial plant construction

The upper performance range of the Luibl fleet covers projects for which no other aerial work platform category is sufficient: facade installation on multi-storey industrial and logistics buildings, steel construction assembly in plant engineering, roof work on halls with ridge heights above 20 m. Luibl is one of the few rental companies in Switzerland to hold several 34 m diesel scissor lifts in its own fleet.

The flagship of this class is the Holland Lift HL 340D30 4WDS: 34 m working height, 1,000 kg load capacity, 3 m platform width, unladen weight of approximately 32 tonnes. The platform can be extended to up to 9.66 m – a figure rarely matched by comparable competitor products. Control of all drive and lift functions is proportional. An electronic tilt sensor automatically shuts off the lift function as soon as the permissible ground incline is exceeded. A differential lock and an engageable fast gear further round out the chassis.

Also in the fleet: the Magni DS3225RT with 32 m working height, as well as the Holland Lift Megastar G320, the predecessor model to the HL 340D30 with an identical working height.

Important planning note: Machines in the 34 m class have an overall width of 3 m and a transport weight of nearly 32 tonnes. This requires special transport. Please allow a lead time of approximately 2–3 weeks for permits and transport organisation. Luibl coordinates the special transport with its own low-loader fleet.

Equipment class at a glance:

• Working height: 23 m to 34 m
• Load capacity: up to 1,000 kg
• Maximum platform extension: up to 9.66 m
• Transport logistics: special transport required from the 34 m class upward, lead time 2–3 weeks
• Typical models: Holland Lift HL 340D30 4WDS, Magni DS3225RT, Holland Lift Megastar G320

On paper, "all-terrain" sounds like a single, simple feature. In practice, it is the combination of several chassis characteristics that determines whether a diesel scissor lift can actually be set up safely on a real construction site.

Four-wheel drive and four-wheel steering are the basic prerequisites. Four-wheel drive transfers drive power evenly to all axles – essential on soft ground, where a single axle alone would spin. Four-wheel steering allows obstacles to be navigated in confined spaces, which is often underestimated with long platform machines used outdoors.

Oscillating axle: On uneven surfaces, the oscillating axle allows all four wheels to maintain permanent ground contact – even when the ground level varies between the axles. Without this feature, a wheel would lift off on uneven ground, causing lateral instability that the electronic tilt sensor can detect but not prevent. The oscillating axle is standard equipment on most machines from the 20 m class upward.

Differential lock: If a drive wheel loses traction on slippery or soft ground, the differential lock prevents one-sided wheel spin and redirects torque to the wheel with better grip. In facade work on topsoil – particularly after rainfall – this feature is the decisive difference between a machine that keeps working and one that gets stuck.

Solid rubber tyres vs. off-road tyres: All-terrain models with foam-filled or solid rubber tyres offer a decisive advantage in production halls and on freshly coated industrial floors: they leave no tyre marks. For projects where the machine switches between outdoor and indoor use, this is an important selection criterion. The HAB S225-24 D4WDS is available in the Luibl fleet with such non-marking solid rubber tyres.

All diesel scissor lifts from the Luibl rental fleet are technically inspected prior to delivery. The inspection obligation arises from Ordinance 3 to the Employment Act (ArGV 3) in conjunction with VUV / SUVA guidelines (incl. EKAS) and SN EN 280 – the European standard for mobile elevating work platforms. This standard mandates regular inspections by competent persons, defines the minimum structural requirements (tipping stability, load charts, wind load limits) and sets out the operator's documentation obligations.

For long-term rentals, Luibl offers combined packages that include an inspection in accordance with VUV and annual maintenance – particularly useful for projects running over several months, since the inspection obligation applies regardless of whether the machine is purchased or rented.

Transport is carried out using Luibl's own low-loader fleet. For standard machines up to 28 m working height, no special permit is generally required. For the 34 m class (3 m overall width, weight approx. 32 t), special transport is required – Luibl coordinates the permit and vehicle provision. Delivery is available throughout Switzerland and to all other Luibl markets: Austria, Switzerland, Poland, Czech Republic, Italy, Hungary, Luxembourg.

In the event of technical faults during the rental period, a technician callout can be requested via the form on luibl.ch. The technician is dispatched directly to the site to minimise downtime.

Checklist for site managers before ordering equipment:

• Check the load-bearing capacity of the ground at the setup location (guideline: point load depending on machine class up to 30 t over a footprint of approx. 3 m × 4 m)
• Clarify access width and clearance height for the low-loader and the machine
• Measure ground incline (maximum permissible per manufacturer specification; typically ≤ 3° in operation for 34 m models)
• Request the inspection record from the most recent inspection under VUV for submission to the authorities
• For 34 m models: allow 2–3 weeks lead time for special transport permits

Submit a no-obligation request for your project now – provide your desired working height, location and rental duration, and Luibl will prepare a tailored quote including availability and transport planning:

Submit Request Now → luibl.ch/en/contact/